7 ] Downloading/Uploading By Ftp (Bht-7500S/7500W Only) - Denso BHT-7500S User Manual

[ 7 ] Downloading/Uploading by FTP
FTP MENU
1:DOWNLOAD
2:UPLOAD
[7.1] Downloading by FTP
DOWNLOAD FILE
SERVER IP:XXX.XXX.XXX.XXX
CURRENT DIRECTORY:
.../ABCD/EFGH/IJKL/MNOP/QR
ST/UVWX/YZ/0000/1111/22222
1:DIR/FILE
[
2:FIELDS
[
--------------------------
Chapter 2. Getting Started the BHT and System Mode
Selecting "7:FTP" on the SYSTEM MENU calls up
the screen shown at left.
1 DOWNLOAD : Downloads a file by FTP.
2 UPLOAD
Select a desired item by using the numerical keys
or and
To return to the SET SYSTEM menu, press the C
key.
Selecting "1:DOWNLOAD" on the FTP MENU calls
up the screen shown at left where the current set-
tings are displayed.
IP address of an FTP server you have specified
Current directory reserved
]
Entry box for a directory and/or file name
]
Entry box for field information of a data file to be
downloaded
Status message
1 DIR/FILE : Specifies a directory and/or file
2 FIELDS
Select a desired item by using the numerical keys
or and
The entry box of the selected item becomes ready
to accept entry and a cursor appears.
Enter the desired value by using the numerical
keys and period (.) key and then press the ENT
key.
Pressing the SF key switches the entry mode
between the numeric mode (without a guidance)
and alphabet mode.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
To return to the FTP MENU, press the C key when
any item is highlighted.
91
(BHT-7500S/7500W only)
: Uploads a file(s) by FTP.
keys, and then press the ENT key.
name. (For details, refer to the next
page.)
: Specifies field information of a data
file. (For details, refer to the next
page.)
keys, and then press the ENT key.