Denso BHT-7500S User Manual page 75

[4.1] Setting an execution program
SET EXECUTE PROGRAM
EASYPACK.PD3
SAMPLE1.PD3
SAMPLE2.PD3
SAMPLE3.PD3
SAMPLE4.PD3
SET EXECUTE PROGRAM
******************
* NO FILE EXISTS *
******************
Chapter 2. Getting Started the BHT and System Mode
Selecting "1: EXECUTE PROGRAM" on the SET
SYSTEM menu calls up the screen shown at left.
Highlighted is the current setting.
Use the
and
desired execution program to be run when the
power is applied, and then press the ENT key.
To return to the SET SYSTEM menu, press the
C key.
If no program files are stored in the memories, the
screen shown at left will appear.
To return to the SET SYSTEM menu, press the C
key.
55
keys to move the cursor to a