Table of Contents
Advertisement
Preparation
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1
Select the menu. (l 30)
MENU
: [OTHER FUNCTION] # [CLOCK SET] # [YES]
2
Touch the date or time to be set, then set
the desired value using
≥ The year can be set between 2000 and 2039.
≥ The 12-hour system is used to display the time.
3
Touch [ENTER].
≥ The screen may switch to the setting screen for the [TIME ZONE]. Touch the screen and
set the [TIME ZONE].
≥ Touch [EXIT] to complete the setting.
≥ The date and time function is driven by a built-in lithium battery.
≥ If the time display becomes [- -], the built-in lithium battery needs to be charged. To
recharge the built-in lithium battery, connect the AC adaptor or attach the battery to this
unit. Leave the unit as it is for approx. 24 hours and the battery will maintain the date and
time for approx. 6 months. (The battery is still being recharged even if the unit is off.)
≥ Display method of clock can be changed by setting the [DATE/TIME] or [DATE FORMAT].
(l 124)
Time zone
Time difference from the Greenwich Mean Time can be set.
1
Select the menu. (l 30)
MENU
: [OTHER FUNCTION] # [TIME ZONE] # [YES]
≥ If the clock is not set, set the clock to current time first.
2
Touch
/
and set the region to record.
3
Touch [ENTER].
≥ Touch [EXIT] to complete the setting.
/
.
29
VQT3U98
Advertisement
Table of Contents
