Table of Contents
Advertisement
About the screen indication of the unit
≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or
card access icon (
≥ If the screen does not change when the unit is operated while connected to a PC,
disconnect the battery and/or AC adaptor, wait approximately 1 minute, reconnect the
battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit
back on. (Data may be destroyed when above operation is performed while accessing
the SD card.)
About the PC display
When the unit is connected to a PC, it is recognized as an external drive.
≥ Removable disk (Example:
We recommend using HD Writer XE 1.0
to copy motion picture data.
Using Windows Explorer or other
programes on the PC to copy, move or
rename files and folders recorded with
this unit will result in them being unusable
with HD Writer XE 1.0.
Example folder structure of an SD card:
CAM_SD
DCIM
100CDPFQ
101CDPFS
PRIVATE
AVCHD
The following data will be recorded.
1 MPO system/JPEG system still
pictures (up to 999 still pictures can
be recorded. ([11000001.MPO],
[11000001.JPG], etc.))
2 MPO system/JPEG system still
pictures created from motion
pictures
3 The motion picture thumbnails
4 AVCHD format motion picture files
([00000.MTS] etc.)
) appears on the unit screen.
AVCHDTN
BDMV
) is displayed in [Computer].
∫ Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programes.
1
Double click the folder that contains
the still pictures. ([DCIM] #
[100CDPFQ] etc.)
2
Drag and drop the still pictures onto
the destination folder (on the PC's
HDD).
≥ Do not delete the SD card's folders. Doing
so may make the SD card unusable in this
unit.
≥ When data not supported by this unit has
been recorded on a PC, it will not be
recognized by this unit.
≥ Always use this unit to format SD cards.
103
VQT3U98
Advertisement
Table of Contents
