Connecting With A Hdmi Cable; Listening In 5.1 Channel Sound; Connecting With The Av Multi Cable - Panasonic HDC-Z10000P Owner's Manual

Connecting with a HDMI cable

Select the desired method of HDMI output.
MENU
: [OTHER FUNCTION] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ The image quality of [AUTO] differs from that of [1080p], [1080i] and [480p].
≥ Image will not display on TV for a few seconds in the following cases.
j When [3D OUTPUT] is switched (l 74, 92)
j When switching [3D/2D REC MODE] during the Recording Mode.
j When [REC FORMAT] is switched to [1080/60p] during the Recording Mode
j When the play mode selection is set to [3D] during the Playback Mode
j When the play mode selection is set to [2D] and scene in 1080/60p is switched to scene
other than 1080/60p, or vice versa, during the Playback Mode
j When the play mode selection is set to [PICTURE] and a 3D still picture is switched to
2D still picture, or vice versa, during the Playback Mode.

Listening in 5.1 channel sound

The audio recorded with the built-in microphone can be played back as 5.1 ch audio by
connecting this unit with a 5.1 ch compatible amplifier or TV using a HDMI cable.
For connecting this unit with an AV amplifier or a TV, refer to operating instructions of the AV
amplifier or the TV.
≥ The audio recorded with [MIC SETUP] set to [2ch] will be in stereo (2 ch).

Connecting with the AV multi cable

AV multi connector output setting can be changed.
MENU
: [OTHER FUNCTION] # [AV MULTI] # desired setting
[COMPONENT]:
[AV OUT]:
Changing the component output setting
MENU
: [OTHER FUNCTION] # [COMPONENT OUT] # desired setting
[480i]: When connecting to the component terminal on the TV compatible with
480i. (Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i. (Playback is in high definition quality.)
90
VQT3U98
When connecting to the component terminal
When connecting to the video terminal