Table of Contents
Advertisement
About the SD card
When disposing of or giving away the SD
card, note that:
≥ Formatting and deletion of this unit or
computer only changes the file
management information and does not
completely delete the data in the SD card.
≥ It is recommended that the main SD card
is either physically destroyed or the SD
card is physically formatted using this unit
when disposing of or giving away the SD
card.
≥ To physically format, connect this unit to
the AC adaptor, select
[OTHER FUNCTION] # [FORMAT CARD]
# [SD CARD 1] or [SD CARD 2] from the
menu, and touch [YES]. Press and hold
recording start/stop button in the following
screen for three seconds. Screen to delete
the SD card data is displayed, so select
[YES] and follow the instruction on the
screen.
≥ The customer is responsible for the
management of the data in the SD card.
144
VQT3U98
LCD monitor/viewfinder
≥ When the LCD monitor gets dirty, wipe it
with a soft cloth, such as eye glass
cleaner.
≥ Do not touch the LCD monitor with your
finger nails, or rub or press with strong
force.
≥ It may become hard to see or hard to
recognize the touch when the LCD
protection sheet is affixed.
≥ In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth,
such as eye glass cleaner.
≥ When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
on. The normal brightness will be restored
when the unit's internal temperature rises.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
1,152,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
Extremely high precision technology is
employed to produce the viewfinder
screen featuring a total of approximately
1,226,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
Advertisement
Table of Contents
