Panasonic HDC-Z10000P Owner's Manual page 138

Problem
When connected by the
USB cable, this unit is
not detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
Cannot see the PDF
operating instructions
for HD Writer XE 1.0.
Problem
Item other than the
touched one is selected.
If the SD card is inserted
in this unit, it is not
recognized.
The wireless remote
control does not
function.
138
VQT3U98
With a PC
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 97, 105)
≥ Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for HD Writer XE 1.0.
Others
≥ Calibrate the touch screen. (l 26)
≥ If the SD card is formatted on a PC, it may not be
recognized by this unit. Use this unit to format SD cards.
(l 34)
≥ [REMOTE CONTROL] of the [OTHER FUNCTION] is
[OFF]. (l 31)
≥ The button-type battery of the wireless remote control
may be run out. Replace it with a new button-type battery.
(l 31)
Check points
Check points