Table of Contents
Advertisement
3D Macro
3D image can be recorded as close as approximately 45 cm (1.5 feet) to the subject when
the zoom magnification is set to 1k.
≥ Set [3D/2D REC MODE] to [3D]. (l 36)
≥
is displayed.
≥ Canceling returns the convergence point to the original position.
≥ The setting is canceled in following cases:
j If you adjust the CONV. dial (l 40)
j If you perform the convergence reset
≥ Stop the recording when you feel fatigue, discomfort, or otherwise strange while
recording.
Convergence Reset
The display of the convergence point goes to
set to prevent 3D video that tires or discomforts the viewer.
≥ When the zoom magnification is changed, the convergence point is adjusted automatically,
so please use this setting you wish to record faraway subjects without worrying about
convergence.
≥ The setting is canceled in following cases:
j If you adjust the CONV. dial (l 40)
j If you use the 3D Macro
Recording Check
Approximately 2 seconds at the end of the video recorded last can be played back. It will
return to recording screen once the playback is completed.
≥ Playback operation is not possible during the Recording Check.
≥ Recording Check is not possible in following cases:
j When the unit is turned on/off
j When the mode switch is operated
j When the setting of [3D/2D REC MODE] or [REC FORMAT] is changed
j When the SD Card is inserted/removed
j During the interval recording
, and the convergence point is automatically
73
VQT3U98
Advertisement
Table of Contents
