∫ Adjust the length of the grip belt so that it fits your hand.
∫ Attaching the eye cup
Attach by aligning the notch of the eye cup attachment part with the protrusion at the inside of
the eye cup.
∫ Attaching the microphone holder
C Microphone holder adaptor
D Microphone holder
E Microphone holder screws (12 mm) (0.47 q)
F Microphone holder attchment part
G Microphone holder screws (6 mm) (0.24 q)
≥ Attach by using a commercially available screw driver.
≥ When attaching an external microphone (optional) to the microphone holder attchment
part, use the supplied microphone holder and microphone holder adaptor.
≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone can be
attached. Check in advance whether the microphone you wish to use can be attached.
1, 2 Flip the belt cover and the belt.
3
Adjust the length.
4, 5 Replace the belt.
A Notch
B Protrusion
15
VQT3U98