Relay Recording; Backup Recording - Panasonic HDC-Z10000P Owner's Manual

≥ Recordable time using the battery (l 20)
≥ This function's default setting is [1080/60i] (3D Recording Mode)/[HA] (2D Recording
Mode).
≥ Please refer to page 147 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
[RELAY/BACKUP]
You can set the relay recording and backup recording.
≥ Insert SD cards to card slot 1 and card slot 2.
[OFF]:
[RELAY]:
[BACKUP]:

∫ Relay recording

It is possible to continuously record on the SD card in the other card slot even when the
available capacity of the SD card runs out during the recording.
≥
is displayed on the media to record the video.
media is switched and the relay recording is started.
≥ Relay recording can only be performed once.

∫ Backup recording

Same motion picture can be recorded on two SD cards.
≥
is displayed on the cards the motion pictures is recorded.
≥ When [SD CARD 1] is selected as the destination of recording the motion pictures, backup
will be recorded on [SD CARD 2].
≥ It is recommended to record on the SD cards that are same speed class and same
capacity when performing the backup recording.
(Relay recording)
≥ Destination to record still pictures will be switched to other SD card after performing the
relay recording.
(Backup recording)
≥ Backup recording will not be performed for still pictures.
116
VQT3U98
Cancel the setting.
Set the relay recording
Set the backup recording
will disappear when the recording