Middle Frame Unit Removal - Epson Stylus 1500 Service Manual

Stylus 1500 Service Manual

3.2.12.9 Middle Frame Unit Removal

1. Remove the printer mechanism. (See Section 3.2.2.)
2. Remove the carriage unit. (See Section 3.2.12.2.)
3. Remove the paper eject frame unit. (See Section 3.2.12.3.)
4. Remove the base frame. (See Section 3.2.12.5.)
5. Remove the paper eject drive unit. (See Section 3.2.12.6.)
6. Remove the paper feed roller unit. (See Section 3.2.12.8.)
7.
Remove 2 (CBS 3 6) screws securing the middle frame to the bottom frame and the
(CBS 3 6) screw securing the middle frame to the paper pickup guide frame.
8. Remove the middle frame unit by pulling it forward and then upward.
Assemble the middle frame unit so that it fits the bottom frame completely.
Do not place the cables between the sub frame and the bottom frame.
Never touch the white PF gears. Handling them will cause damage or contamination that
will affect print quality.
ASF Transmission Ratchet
Paper Pickup
Guide Frame
Figure 3-29. Removing the Middle Frame Unit
Rev.A
Middle Frame Unit
Disassembly and Assembly
CBS 3 x 6
Bottom Frame
3-29