Stylus 1500 Service Manual
1.4.4.1 Setting Method
The method of setting defaults is shown in the flowchart below.
n Any default value specified is not stored in the EEPROM until the printer is turned off.
n The last default value specified before power-off is stored in the EEPROM.
Hold down the Economy /Condensed
button, and turn on the printer.
The printer prints:
1. Firmware version,
Protect counter value A/C.
2. How to set defaults.
3. Current settings.
Change the settings?
Turn printer power off to save settings to the EEPROM.on the main board
Rev. A
START
YE S
N O
E N D
Figure 1-6. Default Setting Flowchart
General Description
Change setting menu: Alt button
Change setting value: Pause button
1-17