Operations; Control Panel; Buttons; Figure 1-5. Control Panel Appearance - Epson Stylus 1500 Service Manual

Stylus 1500 Service Manual

1.4 OPERATIONS

This section describes the controls, settings, and adjustments used to operate the Stylus 1500.

1.4.1 Control Panel

The control panel for this printer is in the center of the upper case. The panel has 1 lock-type and 6
non-lock-type pushbuttons, and 10 LED indicators for easy operation of the various print functions.

1.4.1.1 Buttons

Power
This button turns the printer on or off.
The power button controls the secondary power supply circuit. Therefore, the primary circuit is
hot after power off. Do not connect the interface cable even if the printer power is off while the
AC inlet is connected. Otherwise, the circuit board or interface may be damaged.
Pause
This button alternates between printing and non-printing states when there is data in the print buffer. In the
pause state, printing stops but communication with the I/F does not stop. Therefore, even in the pause state,
the printer receives data from the host until the input data buffer is full.
o
Pressing the Pause button while holding down the Alt button resets the printer.
Alt
This button is usually used with another button.
o Holding down Alt for 3 seconds moves the printer carriage to the ink cartridge
installation position. Pressing Alt again returns the carriage to the home position.
LF/FF
This button feeds one line or a page.
o Pressing LF/FF while holding down Alt starts the black printhead cleaning cycle.
Economy/Condensed
This button selects economy or condensed printing mode.
Rev. A

Figure 1-5. Control Panel Appearance

General Description
1-13