Pump Unit Removal - Epson Stylus 1500 Service Manual

Disassembly and Assembly

3.2.12.4 Pump Unit Removal

1. Remove the printer mechanism. (See Section 3.2.2.)
2. Remove the carriage unit. (See Section 3.2.12.2.)
3. Remove the paper eject frame unit. (See Section 3.2.12.3.)
4.
Remove the (CBP 3 8) screw securing the pump unit to the right frame and the (CBS 3 6) screw
securing the pump unit to the middle frame, and then remove the pump unit.
Keeping the head cleaner clean is extremely important to keep the ink ejection system in the
printhead working properly, and it directly affects print quality. Therefore, handle the head cleaner
very carefully, and observe the following precautions:
Never touch the head cleaner with your bare hands.
When attaching the head cleaner to the pump unit, place the rubber face of the head cleaner
toward the right, using gloves and clean tweezers.
Head Cleaner Lever
Middle Frame
3-22
CBS 3 x 6
Rubber Face of Head Cleaner
Figure 3-22. Removing the Pump Unit
Stylus 1500 Service Manual
Pump Unit
Right Frame
CBP 3 x 8
Rev.A