Epson Stylus 1500 Service Manual page 119

Stylus 1500 Service Manual
6.
Refer to the pattern to change the value, within the range 30 to –30, by pressing the
Press Enter to write the data to the EEPROM. The printer immediately prints a new pattern using the
input value.
7. Press ENTER to exit the setting mode, or press SPACE to continue making settings.
rThe settings are not stored permanently in the EEPROM until the printer is turned off. Turn
off the printer at once after adjustment.
rPerform the initial ink charge operation using the adjustment program before sending the unit
back to the customer.
8. The menu below appears on the display. If you want end the program, press 5.
Stylus 1500 <********> Customer Data <********> 95/**/**
( Customer Data Input ) .... 1
( Adjustment
( END
SELECT MENU
n
9. Turn off the printer.
Rev.A
) .... 2
) .... 5
Adjustments
and keys.
4-15