Setting Menus; Table 1-8. Default Settings - Epson Stylus 1500 Service Manual

General Description

1.4.4.2 Setting Menus

The default setting menus are described in the table below.
Menus
*1
Print direction
Font
Pitch
I/F mode
Auto I/F wait mode
Software
Auto CR
(IBM mode only)
AGM
(IBM mode only)
Character tables
(standard version)
Character tables
(NLSP version)
International
character set for
italic table
Auto line feed
Network I/F mode
Zero slash
Page length for
continuous paper
Skip over perforation
Auto tear off
*3
Print mode
Paper roll
Notes: *1. Refer to Tables 1-9 and 1-10.
*2. This is selected when a value other than 11, 12, 8.5, or 70/6 inches has been placed
in EEPROM by the ESC | command.
*3. This mode is provided only for DOS users and is selected according to paper type.
Pure black and composite black are selected according to the printed result.
1-18

Table 1-8. Default Settings

(underlines indicate factory default settings)
Auto / Bi-D / Uni-D
Draft / Roman / Sans Serif / Courier / Prestige / Script / Roman T /
Sans Serif H
10 cpi / 12 cpi / 15 cpi / 17.1 cpi / 20 cpi / Proportional
Auto / Parallel / Serial
10 seconds / 30 seconds
ESC/P2 / IBM X24E
On / Off
On / Off
Italic PC 437 PC 850
PC 861 BRASCII Abicomp
Italic PC 437
PC 855 PC 852
MAZOWIA Code MJK
Roman 8 PC774
PC866 LAT
Italic U.S.A. Italic France
Italic Denmark Italic Sweden
On / Off
Off: Used in standalone environment
On: Used in network environment
0 / 0 with slash
11 inch 12 inch 8.5 inch 70/6 inch Other
On / Off
On / Off
Plain paper (pure black) / Plain paper (composite black) /
Exclusive paper / Transparency
On / Off
Stylus 1500 Service Manual
Settings
PC 860 PC 863
Roman 8 ISO Latin 1
PC 437 Greek PC 850
PC 857 PC 866
ISO 8859-7 ISO Latin 1T
Estonia ISO Latin 1
Italic Germany
Italic Italy
*2
PC 865
PC 853
PC 869
Bulgaria
ISO Latin 2
Italic U.K.
Italic Spain 1
Rev. A