REV.-A
4.2.5 Disassembly of Printer Mechanism
This section describes the removal of each component from the printer mechanism. Refer to Figure A-26, Printer
Mechanism Exploded Diagram, and Table A-10, Component Name List.
4.2.5.1 Paper-Feed Mechanism Removal
1.
Remove the printer mechanism (refer to Section 4.2.4).
2.
Push the notch of the paper-guide-plate release lever, and pull the paper-guide release lever and the paper-
guide release shaft to remove them.
Figure 4-12. Removal of Paper-Guide-Plate Release Lever
3.
Push the notch of the paper-guide-plate release lever from the inside of the frame, and remove the release
lever.
LQ-500/ L-1000
DISASSEMBLY, ASSEMBLY, AND ADJUSTMENT
Figure 4-13. Removal of Release Lever
4-11