Hardware Specifications; Figure 1-2. Pin Configuration; Table 1-3. Cut-Sheet Specifications - Epson L-1000 Technical Manual

REV.-A
1.2 SPECIFICATIONS
This section describes the specifications for the LQ-500/L-1000 printer.

1.2.1 Hardware Specifications

Printing Method
Pin Configuration
Feeding Method
Line Spacing
Paper Insertion
Paper-Feed Speed
Paper Specifications
LQ-500/ L-1000
Serial, impact, dot matrix
24 wires (12 x 2 staggered, diameter 0.2 mm)

Figure 1-2. Pin Configuration

Friction feed, tractor feed (pull tractor)
1/6 inch, or programmable in units of 1/l80 inch
From rear
100 ms/line (at 1/6-inch feed)
2.2 inches per second (continuous feed)
See Tables 1-3 and 1-4

Table 1-3. Cut-Sheet Specifications

GENERAL DESCRIPTION
1-3