Transparencies - Xerox WorkCentre 5050 Quick Reference Manual

Transparencies

Use this feature to add either a blank or printed divider between each transparency
within a set. Always load transparencies in the Bypass Tray. Transparency jobs will
be delivered single-sided, collated with no finishing.
The quantity can only be set to one for this feature.
Options:
The feature is switched off.
Off
Use this option to place a blank sheet between each transparency.
Blank Dividers
Use this option to place the same image on the divider sheet as printed on the
Imaged Dividers
transparency.
Page 4-18 Quick Reference Guide