Xerox WorkCentre 5050 Quick Reference Manual page 74

To use Build Job, split the job into programming and scanning segments. Ensure
Build Job is selected and program and scan the first segment. Continue to program
and load segments until the whole job has been scanned. Select End Build Job
when the entire job has been scanned.
Options:
The feature is switched off.
Off
Use to enable the Build Job feature.
On
Offers options which can be selected when using Build Job.
Build Job
Controls Build Job Controls options are as follows:
Delete Last Segment Use to delete the last segment scanned.
Page 4-26
Select this option after the last segment of the job has been
End Build Job
scanned. The job will be sent to print.
Sample Last Select to see a proof of the last segment scanned.
Segment
Cancel Sample Use to stop and cancel the sample segment that is currently
Printing
printing.
Use to delete the current job and return to the main Build Job
Delete All segments
screen.
Quick Reference Guide