Paper Supply - Xerox WorkCentre 5050 Quick Reference Manual

Use this option to adjust the height (Y) and the width (X) dimensions for reduction
Custom
or enlargement of each dimension independently.
NOTE: Output will NOT be reduced or enlarged proportionally.
Custom options are as follows:

Paper Supply

Use the Paper Supply options to select Auto Paper or a paper tray for the copy job.
Options:
With this option selected the machine chooses the correct paper for the copy job
Auto Paper
based on the size of the originals being scanned.
Use this option to select the paper loaded in Tray 1.
Tray 1
Tray 1 holds 550 sheets of 20lb, substance 20 paper. Weight ranges from 16 -
53lb, substance 16 - 53. Sizes range from 8.5" x 5.5" SEF to 11" x 17" SEF.
Use this option to select the paper loaded in Tray 2.
Tray 2
Tray 2 holds 550 sheets of 20lb, substance 20 paper. Weight ranges from 16 -
53lb, substance 16 - 53. Sizes range from 8.5" x 5.5" SEF to 11" x 17" SEF.
Page 4-8
Produces an image on the copies the same size as the
100%
image on the original.
Automatically fits the image of the original onto the paper
Auto %
selected.
Enables you to customize the width (x) and height (y)
reduction or enlargement to suit your own requirements. A
X50% Y100%
percentage can also be entered by touching the X box or Y
box and using the keypad.
Quick Reference Guide