Making Transparencies With Dividers - Xerox Document Centre Series User Manual

Making Transparencies with Dividers

Typical Application
Originals
Produce transparency sets with divider inserts.
Solution
1. Ensure that transparencies and divider separator stock
2. Load the originals into the Document Feeder.
3. Press the Output Format Tab, then press the
4. On the Transparency Dividers screen, select either
Transparencies
with Dividers
5. Review the tray selections. Press the transparency
6. Press the Start (
TIP Combine this feature with the Multi-Up feature to create
handouts at the same time at the same machine.
Page 38
are loaded into different paper trays.
Transparency Dividers button.
Blank or Imaged Dividers. Selecting Imaged Dividers
will produce dividers with the same image as on the
transparency.
Ensure both tray selections are correct.
Press a button to change the selection.
stock button to change the current tray selection.
Press the divider stock button to change the current
divider stock selection.
) button.
Xerox Document Centre User Guide