Remote Start Diagnostics - Directed Electronics READY REMOTE 24926 Owner's Installation Manual

Remote Start Diagnostics

Remote Start Diagnostics:
Remote Start diagnostics are an important tool that will diag-
nose the status of the remote start system by letting you know
why it remote started, shut down or refused to start as
expected.
No Start Diagnostics:
If the system fails to activate Remote Start, Quick stop, Daily
Start or Vacation mode as expected the parking lights will flash
to indicate the reason. Consult the No Start Diagnostic Chart for
the reason.
No Start Diagnostic Chart
Remote Start
Feature
Any
Daily Start
Vacation Mode
Remote Start
Quickstop
40
LED Description
Flashes
0 Indicates a loss of signal from the transmitter to
the system or a loss of power to the main unit.
3 The unit is in the Valet Mode or Battery Voltage is
below 11v when attempting to activate this
feature.
3 The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake, Hood or Ignition inputs
are active
5 The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake or Hood inputs are active
5 The unit is in the Valet Mode, Battery Voltage is
below 11v, or the Brake or Hood inputs are active
© 2006 Directed Electronics