Step 4, Mounting The Receiver/Antenna - Directed Electronics READY REMOTE 24926 Owner's Installation Manual

Mounting the Receiver/Antenna
Step 4,
Receiver/antenna position should be discussed with the vehicle
owner prior to installation, since the antenna may be visible to
the vehicle's operator.
The best location for the receiver/antenna is centered high on
either the front or rear windshield. For optimal range, the anten-
na should be mounted vertically. It can be mounted horizontally
in relation to the windshield or under the dashboard away from
metal, but range will be diminished. Metallic window tint can also
affect range, so this should be a consideration when determining
the mounting location.
After determining the best mounting location, follow these steps:
1. Clean the mounting area with a quality glass cleaner or
alcohol to remove any dirt or residue.
2. Plug
receiver/antenna.
3. Mount the receiver/antenna using the supplied double-
sided tape.
4. Route the receiver/antenna cable to the control module
and plug it into the four-pin antenna connector.
important! To achieve the best possible range,
DO NOT leave the antenna cable bundled under
the dash. Always extend the cable full length dur-
ing installation, regardless of the antenna mount-
ing location.
28
the receiver/antenna cable into
© 2006 Directed Electronics
the