Directed Electronics READY REMOTE 24926 Owner's Installation Manual page 37

Programming System Settings
Many of the features and operations of this system can be
changed to suit most of today's vehicle electrical systems. The
programming routine and feature menus that follow will allow
making the changes required for most vehicle installations.
System programming routine:
Accessing a Menu:
1. Turn the ignition ON and then OFF in less than 5 seconds
2. Within 3 seconds Press/Hold the Momentary Switch
3. After 2 seconds the LED will flash and the Horn/Siren
will pulse once and repeat.
4. Release the Momentary Switch to access the Menu. The
LED and Horn/Siren outputs will cease.
Accessing a Feature Location:
1. Press and release (do not hold) the Momentary Switch
the same number of times as the feature location to be
accessed. See the Feature Chart for locations.
2. After 2 seconds the LED will flash (the number of flashes
will match with the feature location) to confirm the
feature location. It will flash/pause and repeat until the
feature is changed or programming is exited.
3. Press a button on the transmitter to change the feature
option
a. Option 1: Press the transmitter button assigned to
the Remote Start function (usually the
set factory default Option 1.
34
button) to
© 2006 Directed Electronics