What's in a TopTools for Desktops 3.0 Agent Package?
The HP TopTools for Desktops 3.0 Agent client installation package
and associated documentation is supplied either preloaded on the hard
disk drive, or can be obtained from the HP Web site
Find the TopTools Installation Software" on page
addresses.
Since the information accessed by DMI is specific to each computer,
you must install the HP TopTools for Desktops 3.0 Agent software
package on each PC separately.
The HP TopTools for Desktops 3.0 Agent software package contains
the following:
A Windows utility, SETUP.EXE, to install and initialize the HP
•
TopTools for Desktops 3.0 Agent client software.
A Management Information Format (MIF) file. This file contains
•
information about the elements of the computer that can be
controlled using DMI functionalities. The MIF file is initialized during
installation.
A component code, which instruments DMI attributes.
•
TopTools Windows-based user interface to HP's DMI
•
implementation.
A management application for the client PC, TopTools.exe.
•
The DMI 2.0 Service Provider software, which controls access to the
•
DMI interface.
Systems Management Server (SMS) integration.
•
Crash Monitor.
•
2
Obtaining TopTools Installation Software
What's in a TopTools for Desktops 3.0 Agent Package?
(refer to "Where to
22) for web
21