Canon SmartBase MPC400 Service Manual page 79

SmartBase MPC600F/MPC400 Chapter 3: Assembly and Disassembly
Disassembly 110. DF cover, ADF board
(1) Remove the stop arm from the DF rear cover.
(2) Remove the screw (a), and detach the DF rear cover.
(3) Remove the screw (b).
(4) Free the 2 claws (c), and detach the DF front cover.
(5) Disconnect the 3 connectors (d) from the ADF board.
(6) Remove the screw (e), and detach the grounding wire.
(7) Remove the screw (f), and detach the ADF board.
a
DF rear cover
f
e
ADF board
Stop arm
d
b
c
DF front cover
Figure 3-27 Disassembly
3-31