Canon SmartBase MPC400 Service Manual page 75

SmartBase MPC600F/MPC400 Chapter 3: Assembly and Disassembly
Disassembly 101. Rear cover, Modem board, NCU board, Modular board
(1) Remove the 5 screws (a), and detach the rear cover.
(2) Remove the 3 cables (b) from the SCNT board.
(3) Remove the cable (c) from the NCU board.
(4) Remove the 2 screws (d), and detach the NCU holder.
(5) Remove the cable (e) from the NCU board.
(6) Remove the 2 screws (f), and detach the modem board from the NCU holder.
(7) Remove the 2 cables (g) from the NCU board.
(8) Remove the 2 screws (h), and detach the NCU board from the NCU holder.
(9) Remove the 2 screws (i), and detach the modular board from the NCU holder.
a
Rear cover
d
Modem board
e
f
c
NCU holder
g
h
NCU board
Modular board
i
b
b
Figure 3-24 Disassembly 101
3-27