Canon SmartBase MPC400 Service Manual page 153

SmartBase MPC600F/MPC400 Chapter 4: Maintenance & Service
6-7:PANEL
Press start button.
HHHHHHHHHHHHHHHHHHHH
HHHHHHHHHHHHHHHHHHHH
Press start button.
Press start button.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Press start button.
6-7 PANEL
LED TEST
Press start button.
123456789 0#
When the entire
display has gone out
WM-+SZPEICFNLFRDO
When the entire
display has gone out
abcdefghijkl
When the entire
display has gone out
O K
Press the Stop/Reset key to end the test.
Figure 4-29 Operation Panel
H pattern displayes
All LCD dots displayed
_ pattern displayed
All LED lamps light up
When a button is preesed, the
corresponding character goes out.
When a button is preesed, the
corresponding character goes out.
When a one-touch speed dialing
key is pressed, the corresponding
letter goes out.
4-69