Fixing System; Fixing Assembly - Canon LBP-2000 Service Manual

VII. FIXING SYSTEM
A. Fixing Assembly
1 . C o n s t r u c t i o n
The fixing assembly has the following con-
s t r u c t i o n :
[2] [1]
[3]
Figure 3-7-1
[1] Fixing roller
[2] Pressure roller
[3] Fixing heater
[4] Separation claw
[5] Thermal switch
[6] Thermistor
Note: If you have to remove any part of the
fixing system, be sure to turn off the
power, disconcert the power plug,
and let it cool before doing so.
[4]
[6] [5]
2 . Cleaning the inside of the fixing assem-
bly or replacing its parts
Note: Do not disassemble or clean the fol-
lowing parts found inside the fixing
assembly in the field; a small inac-
curacy in the torque or adjustment,
or deformation by cleaning work, can
cause smoking and flaming:
• T h e r m i s t o r
• Thermal switch
CHAPTER 3
3 - 27