Canon LBP-2000 Service Manual page 145

5 . Removing the paper
s w i t c h
1) Remove the paper feeder pickup assem-
bly. (See steps 1) and 2) of VIII-C-1 'Re-
moving the Paper Feeder Pickup Clutch.')
2) Remove the screw [1], and disconnect the
connector [2]; then, detach the paper
switch assembly [3].
[2]
[1]
Figure 3-8-4
3) Remove the grounding plate [4].
Figure 3-8-5
size detecting
[3]
[4]
4) Remove the 2 paper claws (longer) [5] and
the 2 lower claws (shorter) [6]; then, de-
tach the grounding plate [7]. Remove the
paper size detecting switch [8].
[5]
[6]
Figure 3-8-6
6 . Removing the feed roller
Caution: The roller slave assembly is ad-
justed for height; be sure to take
care not to impose an extra load
on the slave roller bushing [1]
when performing steps 3) through
7).
[1]
Figure 3-8-7
CHAPTER 3
[8]
[7]
3 - 35