Canon LBP-2000 Service Manual page 21

6) Slide in the print sever [5] into the expansion board slot 2 along the groove found inside.
7) Secure the top and bottom of the print server using the two screws [6] that come with the print
server.
8) Connect the network cable to the connector of the print server to suit the network environ-
m e n t .
9) Connect the power cord.
10) Connect the Printer's power cord to the power outlet.
[5]
Figure 1-5-8
[6]
Figure 1-5-9
Figure 1-5-10
CHAPTER 1
1 - 15