Canon LBP-2000 Service Manual page 131

Caution: When mounting the pickup guide
assembly, be sure to refer to the
following diagram. Take care not
to damage or leave out the sensor
[3].
[3]
Figure 3-4-16
3) Remove the screw [4] with a flat-blade
screwdriver, and detach the manual feed
pickup roller [5] and the gear [6].
[6]
[4]
Figure 3-4-17
[5]
3 . Mounting the Manual Feed Pickup
Roller
1) Fit the left side of the manual feed pickup
roller [1] into the machine; then, fit the
right side of the shaft to mount the gear
[2], and fit the left side of the shaft.
[2]
Figure 3-4-18
2) Rotate the manual feed pickup roller [1]
until it stops, making sure that the cam
[2] is as indicated.
[2]
Figure 3-4-19
3) Thereafter, reverse the steps used to re-
move it.
CHAPTER 3
[1]
[1]
3 - 21