Bypass Tray (Tray 5) - Xerox WorkCentre 7132 User Manual

5.
Close the paper tray.
Paper can be loaded either short
edge feed or long edge feed.
6.
Set the machine to detect the
paper size automatically, or
manually specify the required
size. For more information,
refer to Paper Size in the
Setups chapter on page 225.
NOTE: Paper sizes detected by the machine vary depending on the Key Operator
setting. For more information, refer to Paper Size Settings in the Setups chapter on
page 234.

Bypass Tray (Tray 5)

The bypass tray allows you to use a variety of paper types. The bypass tray is located
on the left-hand side of the machine. A tray extension is provided to accommodate
larger sized paper. After loading paper stock in the bypass tray, make sure that the
bypass tray settings on the touch screen match the paper size and type of the stock
loaded. If they do not match, reprogramming is required. For more information on
programming of the bypass tray, refer to [Tray 5 (Bypass)] Screen in the Copy chapter
on page 53.
NOTE: To reduce unnecessary fuser and paper jams, it is important that the
programmed paper size and type is identical to the paper stock loaded.
1.
Load the paper neatly into the
bypass tray, making sure that
the paper stock is in the center
of the tray.
NOTE: Do not load paper above the
maximum fill line.
NOTE: When making single/double
sided copies on perforated paper,
load the paper to feed the opposite
side of the perforated edge first. Feeding the perforated edge first might cause paper
jams.
NOTE: When making copies or prints on thick-stock paper and the paper will not feed
into the machine, apply a curl to the paper as shown in the illustration on the right.
Note however, that excessively bending or folding the paper might cause paper jams.
NOTE: When loading envelopes, make sure the flaps are closed and that the
envelopes are oriented on the tray so that the flaps will enter the machine first.
However, when loading C5-size envelopes, set the long edge feed so that the edge
with the flaps is facing towards you.
Xerox WorkCentre 7132 User Guide
Long edge feed Short edge feed
(LEF) (SEF)
Loading Paper
211