Product Overview; Machine Components - Xerox WorkCentre 7132 User Manual

2 Product Overview

This machine is not simply a conventional copier but a digital device capable of
copying, faxing, printing and scanning, depending on the configuration.
The touch screens shown in this manual are from a fully configured machine to cover
all the features.
The content of the touch screens may vary slightly depending on Key Operator settings
and machine configuration. The button names and icons on the control panel also vary
depending on machine configuration. However, machine features described here
remain the same.
For more information on available options not described here, visit the Xerox website
or contact your Xerox Sales Representative.

Machine Components

The following diagrams show the standard and optional components of the machine.
Configuration may vary depending on the model.
Tray 5 (Bypass Tray)
NOTE: Depending on the configuration, the Document Glass Cover is attached
instead of the Document Feeder. Two optional paper trays can be attached.
Xerox WorkCentre 7132 User Guide
Side Tray
Duplex Module
Tray 1
Tray 2
Tray 3
Document Feeder
(Optional)
Document Glass
(under the Document Feeder)
Control Panel
Touch Screen
On / Off Switch
Center Output Tray
(Exit 2 Tray)
Front Cover
Two Tray Module (Optional)
33