Reduce/Enlarge - Xerox WorkCentre 7132 User Manual

Reduce/Enlarge

This feature allows you to reduce or enlarge copies by a specified ratio within the range
of 25–400%.
1.
Select the [Reduce/Enlarge]
feature on the [Copy] screen.
Reduce/Enlarge
Displays the [Reduce/Enlarge] screen.
[Reduce/Enlarge] Screen
Allows you to select or specify the reduction/enlargement ratio for both the width and
length.
1.
Select [Reduce/Enlarge] on the
[Copy] screen.
2.
Select the required option.
3.
Select [Save].
Preset %
• 100% - Selects output at the same size as the original document.
• Auto % - Automatically reduces/enlarges the image of the document to fit on the
paper size selected.
• Presets - Allows you to select from seven preset enlargement/reduction ratios. The
presets are set up by the Key Operator.
• Copy All - Reduces the image of documents slightly from the selected reduction/
enlargement ratio to copy the complete image onto the paper.
Variable %
Allows you to specify a reduction/enlargement ratio using the screen keypad or the
scroll buttons on the touch screen within the range of 25-400% in 1% increments.
Independent X-Y %
Allows you to specify a reduction/enlargement ratio individually for the width and length
within the range of 25-400% in 1% increments.
• Auto - Automatically specifies the reduction/enlargement ratio individually for the
width and length to fit on the paper.
• Copy All X-Y% - Enables the [Auto] feature, and reduces the image of the document
slightly from the reduction/enlargement ratio to copy the complete image of the
document onto the paper.
Xerox WorkCentre 7132 User Guide
Copy
51