2.17
Reassembly of the Main PCB Assy
Pass the harness through the hole of the shield plate, and set the shield plate on
the bottom cover, as shown in Fig. 3.92.
Shield plate
Power supply
PCB harness
Control panel
PCB harness
Bottom cover
Secure the main PCB assy on the main PCB bottom plate with the five screws, as
shown in Fig. 3.93.
Note: Put on a static control wrist band before handling PCBs.
Main PCB assy
Fig. 3.92
Fig. 3.93
III - 74
Paper feed motor
harness
Size detection
PCB harness
Main PCB
bottom plate