Brother SC-2000 Service Manual page 24

Pull out the connectors from the main PCB assy.
Remove the screw to remove the ground wire from the main chassis, as shown in
Fig. 3.7.
Note: Put on a static control wrist band before handling PCBs.
Main chassis Ground wire
Remove the five screws to remove the main PCB assy from the main PCB bottom
plate, as shown in Fig. 3.8.
Screws
Main PCB assy
Screw
Fig. 3.7
Fig. 3.8
III - 6
Main PCB assy
Main PCB
bottom plate
Screws
Main PCB
bottom plate