Ncu Shield And Ncu Pcb - Brother FAX4100 Service Manual

Facsimile
Hide thumbs Also See for FAX4100:
Table of Contents

Advertisement

1.20 NCU Shield and NCU PCB

(1) Remove three screws from the NCU shield, then take off the NCU shield.
Taptite, cup S M3x6
(Tightening torque: 0.5 N m)
(2) USA version: Disconnect the main-NCU harness from the main PCB.
European version: Disconnect the main-NCU harness and main-NCU harness 2 from the main
PCB. See the illustration given on the next page.
(3) Remove the screw from the NCU PCB and take out the PCB.
IV - 48

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax5750eFax4750eMfc8500Fax8360pMfc9660

Table of Contents