Table of Contents
Advertisement
5. Optional: If using either an external media holder or folded labels, feed the media
through the rear external label entrance chute.
6. Place the paper, print side face up, through the media sensor .
7. Place the label leading edge onto the platen roller.
8. Move the media guides to fit the label width by turning the guide adjuster knob.
9. Disengage the top cover support and close the top cover gently.
10. Use the Diagnostic Tool to set the media sensor type and calibrate the selected sensor
(see the diagnostic utility quick start guide for more information):
a. Start Diagnostic tool.
b. Select Printer Configuration tab.
c. Click Calibrate Sensor button.
Note: Please calibrate the gap/black mark sensor when changing media.
Loading Path for Roll Labels
12
BPP11 User Manual
Hide quick links:
Advertisement
Table of Contents
