Table of Contents
Advertisement
Dump Mode
The printer enters dump mode after printing the printer configuration. In the dump mode, all
characters are printed in 2 columns as shown. The ASCII characters are received from your
system and right side data shows the corresponding hexadecimal value of the characters. It
allows users or engineers to verify and debug the program.
ASCII Data
Notes: • 1. Dump mode requires 4" wide paper width.
• 2. Turn off / on the power to resume printer for normal printing.
• 3. Press FEED button to go back to the previous menu.
Printer Initialization
Printer initialization is used to clear DRAM and restore printer settings to defaults. The only
exception is ribbon sensitivity, which will not be restored to default.
To activate Printer initialization:
1. Turn off the power switch.
2. Hold the Feed button down, then turn the power switch ON.
3. Release the button when the LED turns green after 5 amber blinks. (Any time during the
5 blinks).
The LED color changes as follows:
•
BPP11 User Manual
Amber
Red (5 blinks)
Green/Amber (5 blinks)
Amber (5 blinks)
Green (5 blinks)
Red/Amber (5 blinks)
Hex decimal data related to
left column of ASCII data
Solid Green
21
Hide quick links:
Advertisement
Table of Contents
