Brady BBP11-34L User Manual page 27

Skip AUTO.BAS
TSPL2 programming language lets users download an auto execution file to flash memory.
The printer will run the AUTO.BAS program immediately when printer power is turned on.
The AUTO.BAS program can be interrupted without using the power-on utility to run the
program.
To skip an AUTO.BAS program:
1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED turns solid green.
The LED color changes as follows:
•
4. Printer will be interrupted to run the AUTO.BAS program.
BPP11 User Manual
Amber Red (5 blinks)
Green/Amber (5 blinks)
Amber (5 blinks) Green (5 blinks)
Red/Amber (5 blinks) Solid Green
23