Table of Contents
Advertisement
Printer Function (Calibrate Sensor, Ethernet Setup, RTC Setup...)
1. Select the PC interface connected to the bar code printer.
2. Click Function to set.
3. The detail functions in the Printer Function Group are listed in the table.
Note: For more information about Diagnostic Tool, refer to the diagnostic utility
quick start guide in the CD disk \ Utilities directory.
16
Function
Factory Default
Dump Text
Configuration Page Print printer configuration.
RTC Setup
Calibrate Sensor
Reset Printer
Print Test Page
Ignore AUTO.BAS
Ethernet Setup
Description
Initialize the printer and restore the settings to
factory default.
Activate the printer dump mode.
Synchronize printer Real Time Clock with PC.
Calibrate the sensor specified in the Printer
Setup group media sensor field.
Reboot the printer.
Print a test page.
Ignore the downloaded AUTO.BAS program.
Setup the IP address, subnet mask, gateway for
the on board Ethernet.
BPP11 User Manual
Hide quick links:
Advertisement
Table of Contents
