Table of Contents
Advertisement
External Label Roll Mount Installation (Option)
1. Attach an external paper roll mount on the bottom of the printer.
2. Insert a 1" label spindle into a paper roll and install it on the external paper roll mount.
Note:
f your paper core is 1 inch, remove the 1.5" core adapter from the fixed tab.
I
If label width is 4 inch wide, two fixed tabs are not required.
1.5" Core Adapter*
3. Open the top cover and separate the media holders to fit the media width.
4. Press down the media holder lock switch to fix the media holder.
5. Feed the media through the rear external label entrance chute:
a. Place the paper, print side face up, through the media sensor .
b. Place the label leading edge onto the platen roller.
BPP11 User Manual
Fixed Tab
1" Label Spindle
Printing Side
Face Up
13
Hide quick links:
Advertisement
Table of Contents
