Diagnostic Tool
The Diagnostic Utility is a toolbox that lets users explore the printer's settings and status;
change printer settings; download graphics, fonts, and firmware; create printer bitmap fonts;
and to send additional commands to the printer. Using this convenient tool, you can explore
the printer status and settings and troubleshoot the printer.
Start the Diagnostic Tool
1. To start the software, double click the Diagnostic tool icon.
Note: The diagnostic tool is located at D:\DiagTool.
2. Select the PC interface connected with bar code printer.
Default setting is USB interface. No further setting is required.
If RS-232 port is selected, further setup is required to select the serial port, baud rate, parity
check, data bits, stop bit and flow control.
If Ethernet is selected, need to select the bar code printer.
BPP12 User Manual
20