Diagnostics; Enter Diagnostic Mode; Sensors; Print Engine Base (Peb) Settings - Brady BBP 33 User Manual

Diagnostics

Enter Diagnostic Mode

Sensors

Print Engine Base (PEB) Settings

®
33 Sign & Label Printer User's Manual
BBP
Some diagnostics are not available for users. Advanced diagnostics are password
protected and to be used only with Brady Technical Support. The password is
assigned by Brady.
Use this procedure to access any of the diagnostics menus.
To enter diagnostics mode:
Note: A password is required to access the Advanced Diagnostics menus.
1. Press to go to the navigation menu.
2. Press or to scroll to Tools, the press
3. Press to scroll to Diagnostics, then press
4. When done, press
This procedure displays the PEB settings on the printer.
To view the PEB settings:
1. Access Diagnostic mode (see "Enter Diagnostic Mode" on page 3-17).
2. Press to select Sensors.
3. Press to select PEB Settings. The PEB settings display results for the
following:
CutLine - Lead.
Leading - Print
Print - Diecut
Diecut - Tapeout
Rocker Steps
Print - Center
4. Press repeatedly to exit to the main menu or
Settings menu.
to go to the submenu.
to exit the test.
xxxx
xxxx
xxxx
xxxx
xxxx
xxxx
Tools
Diagnostics
to go to the diagnostics list.
to return to the PEB
3
-
17