Table of Contents
Advertisement
ling time is e.g. 2 seconds, you have
two seconds to press the
cancel the entire SOS procedure, in-
cluding sending of the short message.
Also note that calcelling must be done
in time, before the message has been
sent or call started. For further infor-
mation, please see the chapter Main
menu, Settings, Telematics settings,
Emergency settings, Cancelling time
of emergency call.
7. The name of the emergency call is
chosen.
- For further information, please see the
Main
chapter
Telematics settings, Emergency set-
tings, Emergency call name.
8. The emergency confirmation setting
is chosen.
- For further information, please see the
Main
chapter
Telematics settings, Emergency set-
tings, Emergency confirmation.
c
key to
menu,
Settings,
menu,
Settings,
BENEGUARD-BUTTON: SOS MESSAGES AND SOS CALLS
SOS PROCEDURE WHEN ONLY
SENDING SHORT MESSAGE
1. Press the SOS button (
of the phone.
- Press and hold down the SOS button
or press the button quickly two times
(depending on the instructions dis-
played).
2. At the same time when sending the mes-
sage, the phone sends the position in-
formation.
If
coordinates are not available, previous
coordinates will be sent instead.
3. If the
Emergency confirmation
turned on, the phone will go on send-
ing the message until receiver of the
message sends the confirmation to your
phone.
4. As a sign of a sent SOS message, the text
SOS message sent
the sound of the emergency environ-
ment will be stopped.
<
) on the top
current
position
setting is
will be displayed and
35
Advertisement
Table of Contents
