Initializing The Phone - Benefon Track Pro 1.1 Manual

3. Lift the cap on the top of the rubber tab.
4. Fit the battery into place as described in
the previous chapter. The idea is that
the battery will be securely fastened in
the battery hole.
5. Finally stuff the bottom cover into the
bottom connector so that the cover will
be firmly secured around the connec-
tor.
26 OPERATION: WHAT TO DO FIRST
Bottom cover
Bottom connector

Initializing the phone

When you start using the phone for the first
time, you should charge the battery first.
Please note that the battery will reach its
full capacity only after two or three charg-
ing times.
The standard time (UTC) comes to your
phone from a satellite and setting the time
requires searching for position (by turning
the GPS on and lifting the GPS antenna).
Searching for position for the first time
might take some time (even 15 min) and the
function works only outdoors.
For further information about the GPS,
please see the chapters Quick menu, Posi-
tion refresh and Send position and Main
menu, GPS.
For further information about configuring
the standard time (UTC) to show your local
time (the time used in your country), please
see the chapter Main menu, Settings, Phone
settings, Date and time.