Send Position - Benefon Track Pro 1.1 Manual

n
1. Press to open the quick menu and
find the Position refresh
-
2. Press to refresh the position.
SELECT
3. To request the assisted GPS informa-
-
tion, press
OK.
.
quest, press
NO.
quite accurate, the AGPS is not needed.
Please note that using this function might
increase power consumption.
If you want that the position will be updat-
ed automatically, please see the chapter
Main menu, GPS, GPS settings, GPS operat-
ing mode.

SEND POSITION

In this menu you can send your position to
the service center or to someone you de-
sire, e.g. a friend or relative. You can also
enclose a short message to go along with it.
If your position has changed since the latest
position calculation, you may refresh the
44 QUICK MENU: SEND POSITION
menu.
To cancel the re-
If your position is
position before the sending. For further in-
formation, please see the chapter Quick
menu, Position refresh.
-
1. Press to enter the
SELECT
tion .
2. Find the desired option
to complete the operation.
- By selecting Send to center, you will
send your position to the service cen-
ter immediately, without a message.
- By selecting Write message, you can
first write a message and then select
the receiver. Receiver can be the ser-
vice center as well as a private person.
Key in the receiver´s phone number
or recall it from the phone book by
-
pressing
SEARCH
- To send your position information to
a private person, without any message
enclosed, select the option Write
message and leave the text buffer
blank.
Send posi-
n -
and press
.