Assisted Gps (Agps) - Benefon Track Pro 1.1 Manual

Hide thumbs Also See for Track Pro 1.1:
Table of Contents

Advertisement

Full power
: You can turn the GPS on to
search for satellites (calculate position)
frequently. Using this mode consumes
more power than the other modes but it
has the best accuracy and works better in
limited satellite coverage. It is recom-
mendable to use this option if the phone
is attached to the quick charger or car kit.
Low power
: The satellites are read at
slightly longer intervals. While this mode
has very low power consumption, it may
not be so reliable in limited satellite cov-
erage.
Economy
: Reading satellites is adapted to
the present circumstances and optimized
according to the power consumption.
Interval for reading satellites might be
quite long and irregular. However, the
interval can be adjusted by the service
provider.
GPS off
: While the GPS is turned off, the
satellites will not be read (and the posi-
tion will not be calculated and updated).
- If the GPS is turned off and you try to
send position or send an emergency
message, the position sent is your old,
last calculated position. To make
sure, the position represents your
current whereabouts, refresh the po-
sition before sending by selecting Po-
sition refresh in the quick menu.

ASSISTED GPS (AGPS)

In this menu you can specify settings for or-
dering assisted GPS information from a ser-
vice
provider.
The
ephemeris information from a given num-
ber of satellites. It is used for speeding up
the initial position fix. The AGPS informa-
tion may also help in finding satellites and
getting position in difficult conditions.
-
Press
to enter the
SELECT
menu
Scroll the options with
.
SMS number
: Press
the SMS number of the AGPS service. (By
-
pressing
SEARCH
the number from your phone book.)
MAIN MENU: GPS
AGPS
contains
Assisted GPS
n
.
-
and key in
CHANGE
you can also recall
163

Advertisement

Table of Contents
loading

Table of Contents